MicroPython Board With a Crystal, and a New Motor Driver Board
So, I ordered a few of the crystals Damien used on the official MicroPython board, and although physically it isn't a perfect fit, it works, so I now have a nice clean board.
I also got rid of the orange LED, and replaced it with a proper blue LED (I didn't have any of those left when I put the board together). So, everything is as it should be, and is working nicely.
I also ordered a couple new motor driver boards, and have one hooked up now - it is working great. uCee will be back together again shortly, driving around with my custom MicroPython board (all the videos shown up until now were with the Teensy 3.1 running MicroPython).
![]() |
New Motor Driver Board |
2 Comments:
Do you have the Python code you used for the 8835 motor driver?
By
Craig Smith, At
November 29, 2015 at 5:50 PM
You can find that code here:
https://github.com/JonHylands/uCee-py/blob/master/memzip_files/src/uCee.py#L233-L278
- Jon
By
Unknown, At
December 3, 2015 at 7:34 AM
Post a Comment
Subscribe to Post Comments [Atom]
<< Home