Mini-ITX

I'm really impressed by how all this has come together...
In the picture to the right, the mini-itx is mounted to the bottom plate, along with the solid state hard drive. The top part of the chassis is sitting upright, as if the bottom plate had been hinged down. I've been pretty careful with wire management on this robot, to try and make everything as robust as possible.
I've got my 23" LCD monitor plugged in (DVI), and a USB keyboard and wireless mouse, along with an 802.11n wifi dongle to get network/internet access.
4 Comments:
How do you electrically "feed" that beast? ;)
By
Siempre aprendiendo, At
April 10, 2009 at 2:25 AM
On each side of the mini-itx is a space for two 12 volt 4200 mAh batteries, for a total of 200 watt-hours of power. That should give me at least an hour of usage per battery set...
By
Unknown, At
April 10, 2009 at 8:57 AM
The mini-itx you are using, did you get it from http://www.mini-itx.com/?
What OS are you running?
By
David J Barnes, At
May 7, 2009 at 6:08 PM
I got it from www.newegg.ca
I'm running Windows XP Pro...
By
Unknown, At
May 7, 2009 at 8:00 PM
Post a Comment
Subscribe to Post Comments [Atom]
<< Home